最新Huawei Certified ICT Associate H35-210_V2.5考試題庫，Huawei H35-210

問題1
In Huawei DSLAM products, which of the following attributes VLAN has two layers of VLAN TAG information?

A. Common vlan

B. Super vlan

C. QinQ vlan

D. Stacking vlan

正確答案: C,D

問題2
Regarding the description of UA5000, which of the following statements is wrong?

A. UA5000 supports ADSL2+ service access.

B. The UA5000 does not support VDSL2 service access temporarily.

C. UA5000 adopts the same hardware platform and supports the integration of PSTN, NGN, IMS and FTTx.

D. UA5000 supports various traditional private line services under TDM/PSTN.

正確答案: B

問題3
MA5600T/MA5680T all-in-one package loading method. By tying multiple files into one package file and loading them on the OLT equipment, the upgrade complexity of the OLT equipment can be greatly reduced.
Which of the following options cannot be passed through the all-in-one package tool Unified loading?

A. Special patch for source version upgrade

B. Source version SPH/SPC patch

C. Target version Main package

D. Patch file after upgrade

正確答案: B

問題4
Which of the following access network products can provide ADSL access methods?

A. MA5300

B. MA5100

C. UA5000

D. MA5600

正確答案: A,B,C,D

問題5
What kind of DSL line will affect vectoring performance significantly at a site?

A. A vectoring ADSL2+

B. A non-vectoring ADSL2+

C. A vectoring VDSL2

D. A non-vectoring VDSL2

正確答案: D

問題6
IPMB is the broadband control board of UA5000.
What are its main functions?

A. Supports multicast services and can provide dedicated multicast channels.

B. Forward the VoIP service of the PVM single board, and realize the IP uplink through the FE or GE interface.

C. Used to converge and process broadband services (ADSL, VDSL, SHDSL, LAN)

D. Provide broadband switching resources, have dual-system hot backup function, and support active/standby switchover.

正確答案: A,B,C,D

問題7
Which of the following protocols are included in Point-to-Point Protocol (PPP)? (Select All that Apply)

A. ICMP

B. Network control protocol (NCP)

C. Link control protocol (LCP)

D. IGMP

正確答案: B,C

問題8
Which type of dynamic bandwidth assignment (DBA) is usually used for configuring AR services?

A. Type 3

B. Type 5

C. Type 1

D. Type 4

正確答案: A

說明：（僅 NewDumps 成員可見）

問題9
Generally, an OLT is a switch or router and a multi-service provisioning platform.

A. FALSE

B. TRUE

正確答案: B

說明：（僅 NewDumps 成員可見）

問題10
Which of the following methods can be used for the reset test of the MA5600T/MA5680T single board?

A. All of the above

B. Press the RESET button on the handle bar of the main control board to forcibly reset the main control board. Observe whether the main control board can return to normal after resetting.

C. Use the command board reset to reset the service board. Check whether the service board can be restored to normal after resetting.

D. Hot-swappable the board, check whether the board can be restored to normal after reset

正確答案: A

問題11
Regarding the ATM network, which one of the following descriptions is wrong?

A. Working in the network layer of the OSI model

B. Can guarantee the quality of service performance index (QOS) of various businesses

C. Reduce the processing time of intermediate nodes and support high-speed transmission

D. Support fixed-length exchange

正確答案: A

問題12
When MA5600T is newly launched and connected to the network management system, which of the following descriptions are correct?

A. The interface IP address of the MA5600T used for management must be in the same network segment as the network management IP address

B. The configuration of read community name and write community name is the same as that on the network management side.

C. The configuration of the SNMP version should be the same as the configuration on the U2000 side

D. Add a static route, the destination address is the network segment where the network management IP is located

正確答案: B,C,D

問題13
Is the following description correct? VPI/VCI is a global concept and must be unique under the interface.

A. False

B. True

正確答案: A

問題14
When performing FTTx networking and data planning, user security needs to be considered.
Which of the following measures can prevent attacks between users?

A. Layer 2 isolation and controlled mutual access of users

B. Use anti-mac to solve

C. Defense IP spoofing

D. Use port physical information to identify users

正確答案: A

問題15
The FTP, TFTP, or SFTP mode can be used to transfer files during the upgrade of the access network. The FTP mode is recommended.

A. FALSE

B. TRUE

正確答案: B

說明：（僅 NewDumps 成員可見）

先試後買

購買之前，你可以先嘗試下載一個試用版本。目前我們只提供PDF版本的試用DEMO，軟件版本只提供截圖。

專業認證

品質保證

輕松通過

Try Before Buy

最新的真實試題

相關鏈接

聯繫我們