問題1
Drag the ping and traceroute extended command from the left onto the corresponding purpose on the right.
Drag the ping and traceroute extended command from the left onto the corresponding purpose on the right.
正確答案:
Explanation
問題2
What is the solution of the fault condition?
What is the solution of the fault condition?
正確答案:
Under interface Serial0/0/0.12 delete the "ip nat outside" command and add the "ip nat inside" command TROUBLE TICKET STATEMENT:
The implementation group has been using the test bed to do a 'proof-of-concept' that required both client 1 and client 2 to access the Web Server at 209.65.200.241. After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
The following information requires its own show run to get:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
!
interface Serial0/0/0/1 description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in ip nat outside
ip virtual-reassembly ntp brasdcast client net broadcast key 1 no cdp enable
!
!
ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
!
ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any ip access-list edge_security deny ip 172.16.0.0
0.15.255.255 any ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any ip access-list edge_security permit ip host 209.65.200.241 any
The implementation group has been using the test bed to do a 'proof-of-concept' that required both client 1 and client 2 to access the Web Server at 209.65.200.241. After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
The following information requires its own show run to get:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
!
interface Serial0/0/0/1 description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in ip nat outside
ip virtual-reassembly ntp brasdcast client net broadcast key 1 no cdp enable
!
!
ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
!
ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any ip access-list edge_security deny ip 172.16.0.0
0.15.255.255 any ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any ip access-list edge_security permit ip host 209.65.200.241 any
問題3
Which two conditions can be used to filter the output of the debug crypto condition command? (Choose two)
Which two conditions can be used to filter the output of the debug crypto condition command? (Choose two)
正確答案: A,B
問題4
You are configuring Management Plane Protection on R1, which connects to the 10.100.100.0/24 network using SSH. Drag and drop the required commands or command sequences from the left into the correct sequence on the right.
You are configuring Management Plane Protection on R1, which connects to the 10.100.100.0/24 network using SSH. Drag and drop the required commands or command sequences from the left into the correct sequence on the right.
正確答案:
Explanation
問題5
Refer to the exhibit.
Which statement about the INTERNET ACL is true?
Refer to the exhibit.
Which statement about the INTERNET ACL is true?
正確答案: A
問題6
Exhibit:
A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.)
Exhibit:
A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.)
正確答案: B,F
問題7
Refer to the exhibit. A company has implemented Management Plane Protection (MPP). The monitoring team needs to copy the configuration of Router via a CLI encrypted transport. Which interface must the team use?
Refer to the exhibit. A company has implemented Management Plane Protection (MPP). The monitoring team needs to copy the configuration of Router via a CLI encrypted transport. Which interface must the team use?
正確答案: C
問題8
Drag and drop the mandatory and optional fields for GRE header on the right.
Drag and drop the mandatory and optional fields for GRE header on the right.
正確答案:
Explanation
Mandatory
Reserved 0
Version
Protocol
Optional
Checksum
Key
Sequence number
問題9
Which of the following pieces of information will the command show interface provide? (Choose all that apply.)
Which of the following pieces of information will the command show interface provide? (Choose all that apply.)
正確答案: A,B,C,E
問題10
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?
正確答案: B
說明：（僅 NewDumps 成員可見）
問題11
Which of the following is not a valid reason for a packet to be punted?
Which of the following is not a valid reason for a packet to be punted?
正確答案: C
說明：（僅 NewDumps 成員可見）
問題12
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP group 10.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP group 10.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
正確答案: B
說明：（僅 NewDumps 成員可見）
問題13
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
The fault condition is related to which technology?
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
The fault condition is related to which technology?
正確答案: G
說明：（僅 NewDumps 成員可見）
問題14
The implementation group has been using the test bed to do an IPv6 'proof-of-concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).
The fault condition is related to which technology?
The implementation group has been using the test bed to do an IPv6 'proof-of-concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).
The fault condition is related to which technology?
正確答案: A
說明：（僅 NewDumps 成員可見）