問題1
Drag and drop the configuration management commands on the left to their correct definitions on the right.
Drag and drop the configuration management commands on the left to their correct definitions on the right.
正確答案:
Explanation
問題2
Drag and drop the RP mechanisms on the left to their correct redundancy implementations on the right.
Drag and drop the RP mechanisms on the left to their correct redundancy implementations on the right.
正確答案:
Explanation
問題3
Which protocol is the foundation for unified fabric as implemented in Cisco NX-OS?
Which protocol is the foundation for unified fabric as implemented in Cisco NX-OS?
正確答案: E
說明：（僅 NewDumps 成員可見）
問題4
Which of the following Cisco Nexus features is best managed with DCNM-LAN?
Which of the following Cisco Nexus features is best managed with DCNM-LAN?
正確答案: C
說明：（僅 NewDumps 成員可見）
問題5
Scenario:
The following four questions concern the Nexus 7010' s which are configured as a vPC pair at the core of a Data Center network. You can utilize all the available show commands to answer the Questions Access to the running-configuration is not allowed.
Instructions:
Enter NX-OS commands on 7K-3 and 7K-4 to verity network operation and answer four multiple-choice questions THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
Click on the switch to gain access to the console of the switch. No console or enable passwords are required.
To access the multiple-choice questions, click on the numbered boxes on the loft of the top panel.
There are four multiple-choice questions with this task Be sure to answer all four questions before selecting the Next button Topology:
Within the vpc configuration of the 7K's. the command peer-gateway is configured as confirmed with the command show vpc. What is the result of enabling this command?
Scenario:
The following four questions concern the Nexus 7010' s which are configured as a vPC pair at the core of a Data Center network. You can utilize all the available show commands to answer the Questions Access to the running-configuration is not allowed.
Instructions:
Enter NX-OS commands on 7K-3 and 7K-4 to verity network operation and answer four multiple-choice questions THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
Click on the switch to gain access to the console of the switch. No console or enable passwords are required.
To access the multiple-choice questions, click on the numbered boxes on the loft of the top panel.
There are four multiple-choice questions with this task Be sure to answer all four questions before selecting the Next button Topology:
Within the vpc configuration of the 7K's. the command peer-gateway is configured as confirmed with the command show vpc. What is the result of enabling this command?
正確答案: E
問題6
Which two options are limitations of NetFlow Version 5? (Choose two.)
Which two options are limitations of NetFlow Version 5? (Choose two.)
正確答案: B,C
問題7
You have two Fibre Channel switches that are connected via EISL. You discover that the fabrics are isolated.
What are two possible causes of the fabric isolation? (Choose two.)
You have two Fibre Channel switches that are connected via EISL. You discover that the fabrics are isolated.
What are two possible causes of the fabric isolation? (Choose two.)
正確答案: C,E
問題8
Refer to the exhibit.
You must configure zones on a Cisco MDS 9000 Series SAN switch. Host_A must be able to communicate with target_A and with target_B in the Zoneset_10 active zone set in VSAN 10.
Which command set should you use?
A)
B)
C)
D)
Refer to the exhibit.
You must configure zones on a Cisco MDS 9000 Series SAN switch. Host_A must be able to communicate with target_A and with target_B in the Zoneset_10 active zone set in VSAN 10.
Which command set should you use?
A)
B)
C)
D)
正確答案: C
問題9
You enable the HSRP feature on a Cisco Nexus 7000 Series switch. You must ensure that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address. Which command should you run?
You enable the HSRP feature on a Cisco Nexus 7000 Series switch. You must ensure that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address. Which command should you run?
正確答案: A
問題10
Refer to the exhibit.
What is the consequence of configuring peer-gateway on the two vPC peers N7K-1 and N7K-2?
Refer to the exhibit.
What is the consequence of configuring peer-gateway on the two vPC peers N7K-1 and N7K-2?
正確答案: B
說明：（僅 NewDumps 成員可見）
問題11
Which command configures the aging for VLAN 100 to 500 minutes?
Which command configures the aging for VLAN 100 to 500 minutes?
正確答案: B
問題12
Which command should you run to limit IS-IS LSP flooding on a network?
Which command should you run to limit IS-IS LSP flooding on a network?
正確答案: C