問題1
Your customer has requested you add the Call Park Feature to their Communication
Server 1000 Release 7x system. You have been asked to assign at least eight consecutive numbers that can be used to park calls.
Which CLI overlay and command will provide you with numbers that are unassigned and available?
Your customer has requested you add the Call Park Feature to their Communication
Server 1000 Release 7x system. You have been asked to assign at least eight consecutive numbers that can be used to park calls.
Which CLI overlay and command will provide you with numbers that are unassigned and available?
正確答案: B
問題2
A customer has completed installing and configuring a new CPMG Co-Resident Platform.
The Gateway controller has rebooted and the customer has verified the LED display shows the loop and shelf of the media gateway.
The customer is satisfied the gateway controller has successfully registered to the Call Server.
The customer logs into the system Manager and accesses the UCM Element list and the Gateway controller does not appear in the Element List with the other registered elements in the security domain.
What is the recommended course of action for the customer to ensure the Gateway Controller appears in the Element List?
A customer has completed installing and configuring a new CPMG Co-Resident Platform.
The Gateway controller has rebooted and the customer has verified the LED display shows the loop and shelf of the media gateway.
The customer is satisfied the gateway controller has successfully registered to the Call Server.
The customer logs into the system Manager and accesses the UCM Element list and the Gateway controller does not appear in the Element List with the other registered elements in the security domain.
What is the recommended course of action for the customer to ensure the Gateway Controller appears in the Element List?
正確答案: A
問題3
Click the Exhibit button.
A customer has deployed a Communication Server (CS) 1000Rls. 7x system at their site, and has asked that a swap using the Element Manager Phones tool on the two telephone sets shows in the Print-out be performed.
What should the customer be told regarding the request?
Click the Exhibit button.
A customer has deployed a Communication Server (CS) 1000Rls. 7x system at their site, and has asked that a swap using the Element Manager Phones tool on the two telephone sets shows in the Print-out be performed.
What should the customer be told regarding the request?
正確答案: D
問題4
A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release 7.0.
They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co-Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.
Which action must be taken to consolidate the servers?
A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release 7.0.
They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co-Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.
Which action must be taken to consolidate the servers?
正確答案: C
問題5
A customer is planning to install and configure a Commercial Off the Shelf (COTS) server
IBM X3550 as a Signaling Server for their Communication Server (CS) 1000 Rls.. 7x network.
Which two statements describe the software installation process? (Choose two)
A customer is planning to install and configure a Commercial Off the Shelf (COTS) server
IBM X3550 as a Signaling Server for their Communication Server (CS) 1000 Rls.. 7x network.
Which two statements describe the software installation process? (Choose two)
正確答案: A,D
問題6
A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?
Which overlay is used to configure the MGC SDI ports?
A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?
Which overlay is used to configure the MGC SDI ports?
正確答案: D
問題7
A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card
Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media
Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server,
Signaling Server Card and Gateway Controller has been included as part of the upgrade.
What happens to the Terminal Number (TN) format during this upgrade?
A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card
Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media
Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server,
Signaling Server Card and Gateway Controller has been included as part of the upgrade.
What happens to the Terminal Number (TN) format during this upgrade?
正確答案: B