問題1
The wlmstat -@ 2 command has been run from a global environment with the following results:
What action can an administrator take to set limits, so that both server1 and server2 use the same amount of CPU resources?
The wlmstat -@ 2 command has been run from a global environment with the following results:
What action can an administrator take to set limits, so that both server1 and server2 use the same amount of CPU resources?
正確答案: D
問題2
An AIX LPAR has a disk drive known as hdisk17. The administrator would like to change the name of the disk to redolog0. Which command will achieve this?
An AIX LPAR has a disk drive known as hdisk17. The administrator would like to change the name of the disk to redolog0. Which command will achieve this?
正確答案: A
問題3
A single port on a physical Ethernet adapter (ent0) has failed on a VIO Server. The network devices are as follows:
When using the diagmenu command to deconfigure the physical adapter, an error occurs saying the adapter is in use.
What is the correct sequence to deconfigure the physical adapter?
A single port on a physical Ethernet adapter (ent0) has failed on a VIO Server. The network devices are as follows:
When using the diagmenu command to deconfigure the physical adapter, an error occurs saying the adapter is in use.
What is the correct sequence to deconfigure the physical adapter?
正確答案: D
問題4
A company needs to implement a virtual environment on a Power 770 server using a Virtual I/O Server and a large number of clients. What network solution can be implemented on the Virtual I/O Server to maximize bandwidth for the clients?
A company needs to implement a virtual environment on a Power 770 server using a Virtual I/O Server and a large number of clients. What network solution can be implemented on the Virtual I/O Server to maximize bandwidth for the clients?
正確答案: D
問題5
An architect requires Active Memory Sharing (AMS) to be implemented for a new AIX environment. Which of the following are minimum requirements in order to implement AMS?
An architect requires Active Memory Sharing (AMS) to be implemented for a new AIX environment. Which of the following are minimum requirements in order to implement AMS?
正確答案: A
問題6
A dedicated LPAR has two dedicated Fibre Channel HBAs assigned to it.
In order to reduce the amount of hardware, the LPAR will be migrated to a currently
running VIO server.
The administrator collects some server performance from the VIO server and notices that the I/O peaks at 5.5Gbits and runs at an average of 4Gbits per second.
The VIO Server runs two dual port 8Gbit FCS cards, so the load is not affected by other LPARS on the VIO Server.
Which of the following is the most cost-efficient configuration for the VIO client?
A dedicated LPAR has two dedicated Fibre Channel HBAs assigned to it.
In order to reduce the amount of hardware, the LPAR will be migrated to a currently
running VIO server.
The administrator collects some server performance from the VIO server and notices that the I/O peaks at 5.5Gbits and runs at an average of 4Gbits per second.
The VIO Server runs two dual port 8Gbit FCS cards, so the load is not affected by other LPARS on the VIO Server.
Which of the following is the most cost-efficient configuration for the VIO client?
正確答案: A
問題7
Given the following lspath command output from an LPAR, what is the most likely reason for the current situation?
$ lspath Failed hdisk0 vscsi0 Enabled hdisk0 vscsi1 Failed hdisk1 fscsi0 Failed hdisk1 fscsi0 Enabled hdisk1 fscsi1 Enabled hdisk1 fscsi1 Failed hdisk2 fscsi0 Failed hdisk2 fscsi0 Enabled hdisk2 fscsi1 Enabled hdisk2 fscsi1 Failed hdisk3 fscsi0 Failed hdisk3 fscsi0 Enabled hdisk3 fscsi1 Enabled hdisk3 fscsi1
Given the following lspath command output from an LPAR, what is the most likely reason for the current situation?
$ lspath Failed hdisk0 vscsi0 Enabled hdisk0 vscsi1 Failed hdisk1 fscsi0 Failed hdisk1 fscsi0 Enabled hdisk1 fscsi1 Enabled hdisk1 fscsi1 Failed hdisk2 fscsi0 Failed hdisk2 fscsi0 Enabled hdisk2 fscsi1 Enabled hdisk2 fscsi1 Failed hdisk3 fscsi0 Failed hdisk3 fscsi0 Enabled hdisk3 fscsi1 Enabled hdisk3 fscsi1
正確答案: D
問題8
An administrator plans to implement Active Memory Expansion on several LPARs on a Power 770 system. Which tool should be used to determine the recommended LPAR settings for Active Memory Expansion?
An administrator plans to implement Active Memory Expansion on several LPARs on a Power 770 system. Which tool should be used to determine the recommended LPAR settings for Active Memory Expansion?
正確答案: B
問題9
Which is the lowest edition of PowerVM that will permit redundant VIO Servers?
Which is the lowest edition of PowerVM that will permit redundant VIO Servers?
正確答案: C