問題1
An engineer is troubleshooting a VRTX with the following configuration:
- Dual Shared PERC Internal cards in a fault tolerant configuration
- Nodes installed in SLOTS 1 and 2
- Virtual adapters set to Multiple Assignment
- Two virtual drives set to Full Access on SLOTS 1 and 2
The OS of the node in SLOT 1 shows more than the two disks assigned to it.
What should the engineer do to fix this issue?
An engineer is troubleshooting a VRTX with the following configuration:
- Dual Shared PERC Internal cards in a fault tolerant configuration
- Nodes installed in SLOTS 1 and 2
- Virtual adapters set to Multiple Assignment
- Two virtual drives set to Full Access on SLOTS 1 and 2
The OS of the node in SLOT 1 shows more than the two disks assigned to it.
What should the engineer do to fix this issue?
正確答案: C
問題2
An engineer needs to configure a single network port on a 10 GbE NIC for four virtual network interfaces.
What steps should the engineer perform to complete this task?
An engineer needs to configure a single network port on a 10 GbE NIC for four virtual network interfaces.
What steps should the engineer perform to complete this task?
正確答案: C
問題3
A new engineer is accessing three FX2s chassis through CMC that have been stacked and grouped.
The CMC IP information is as follows:
lead=10.10.10.10
member 1=10.10.10.11
member 2=10.10.10.12
The engineer connects to the CMC at 10.10.10.11, but is unable to manage the group. What does the engineer need to do to manage the group?
A new engineer is accessing three FX2s chassis through CMC that have been stacked and grouped.
The CMC IP information is as follows:
lead=10.10.10.10
member 1=10.10.10.11
member 2=10.10.10.12
The engineer connects to the CMC at 10.10.10.11, but is unable to manage the group. What does the engineer need to do to manage the group?
正確答案: A
問題4
An engineer needs to update BIOS in the following environment:
- Over 100 servers are spread over 10 chassis
- All servers are in the same data center
- The only maintenance window is late Sunday evening when OS patches are applied and servers are rebooted
- Less than 10 minutes of additional downtime per server is allowed
What is the most effective update strategy?
An engineer needs to update BIOS in the following environment:
- Over 100 servers are spread over 10 chassis
- All servers are in the same data center
- The only maintenance window is late Sunday evening when OS patches are applied and servers are rebooted
- Less than 10 minutes of additional downtime per server is allowed
What is the most effective update strategy?
正確答案: C
問題5
An engineer is running an inventory report on a VRTX chassis group for a customer. When the engineer views the report, the engineer notices the inventory of one of the VRTX is missing one of its nodes.
What is the cause?
An engineer is running an inventory report on a VRTX chassis group for a customer. When the engineer views the report, the engineer notices the inventory of one of the VRTX is missing one of its nodes.
What is the cause?
正確答案: C
問題6
An FX2 has one compute node and three storage needs. The server sees only half of the drives in the FD332 in SLOT 3. The chassis needs to be configured to see all drives in all storage nodes. What should an engineer do to accomplish this task?
An FX2 has one compute node and three storage needs. The server sees only half of the drives in the FD332 in SLOT 3. The chassis needs to be configured to see all drives in all storage nodes. What should an engineer do to accomplish this task?
正確答案: C
問題7
An engineer is responsible for data center bare metal deployment. The engineer deploys hundreds of servers each week and must repeatedly deploy a standard hardware (HW) configuration and put the OS on the bare metal servers.
How should the engineer automate some of these tasks?
An engineer is responsible for data center bare metal deployment. The engineer deploys hundreds of servers each week and must repeatedly deploy a standard hardware (HW) configuration and put the OS on the bare metal servers.
How should the engineer automate some of these tasks?
正確答案: B
問題8
An engineer configures an Alert Action in the CMC to send an email on Warning and Critical events. Chassis fan and power events are showing up as expected. Server-specific failures such as memory module failures only indicate that the server has gone into a Critical or Warning state.
What additional configuration needs to be done to be informed via email of the detailed server failure?
An engineer configures an Alert Action in the CMC to send an email on Warning and Critical events. Chassis fan and power events are showing up as expected. Server-specific failures such as memory module failures only indicate that the server has gone into a Critical or Warning state.
What additional configuration needs to be done to be informed via email of the detailed server failure?
正確答案: D
問題9
An engineer is deploying a chassis with four IOAs and connecting it to the top of rack (ToR) switch. The deployment mandate requires that the switches be presented as one logical unit. Future servers can be added to network with the minimal amount of configuration.
The following steps have been completed:
- IOAs are daisy-chained using ports 9 and 10
- Cabled ports 11 and 12 on IOA 1 to the ToR
- Configured a team on NIC ports 1 and 2 on the server
How should the IOMs be configured?
An engineer is deploying a chassis with four IOAs and connecting it to the top of rack (ToR) switch. The deployment mandate requires that the switches be presented as one logical unit. Future servers can be added to network with the minimal amount of configuration.
The following steps have been completed:
- IOAs are daisy-chained using ports 9 and 10
- Cabled ports 11 and 12 on IOA 1 to the ToR
- Configured a team on NIC ports 1 and 2 on the server
How should the IOMs be configured?
正確答案: B
問題10
An engineer is building a new cluster and is using software-defined storage. The FX2 has 4x FC430s and 2x FD332 sleds. The blades are ready to add storage.
How should the engineer configure the FD332 sleds to be used for local storage?
An engineer is building a new cluster and is using software-defined storage. The FX2 has 4x FC430s and 2x FD332 sleds. The blades are ready to add storage.
How should the engineer configure the FD332 sleds to be used for local storage?
正確答案: B