先試後買

A. The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.

B. The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.

C. The SNAT must be enabled for all VLANs.

D. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.

A. It is part of a pool definition.

B. It is part of a virtual server definition.

C. It is always enabled.

D. It is part of a profile definition.

A. The active system will restart the bigd daemon and continue in active mode.

B. The active system will continue in active mode but gather member and node state information from the standby system.

C. The active system will reboot and the standby system will go into active mode.

D. The active system will fail-over and the standby system will go into active mode.

E. The active system will restart the tmm daemon and continue in active mode.

A. It an option within a TCP profile.

B. It is an optional feature of each pool.

C. It is not configured; it is default behavior.

D. It is an optional feature of each virtual server.

A. system clocks

B. MAC masquerade addresses

C. host names

D. profile definitions

E. VLAN fail-safe settings

A. If a client's browser accepts cookies, cookie persistence will always cause a cookie to be written to the client's file system.

B. Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.

C. Cookie persistence allows persistence even if the data are encrypted from client to pool member.

D. Cookie persistence allows persistence independent of IP addresses.

A. rule(s)

B. node address(es)

C. monitor(s)

D. pool(s)

E. load-balancing method(s)

A. Unknown. The pool cannot be determined from the information provided.

B. pool1

C. None. The request will be dropped.

D. pool2

A. SNAT's are enabled on all VLANs, by default.

B. SNAT's can be configured within a Virtual Server definition.

C. SNAT's can be configured within a Profile definition.

D. SNAT's are enabled only on the VLAN where origin traffic arrives, by default

A. As long as client traffic was directed to the alternate port, the virtual server would work as intended.

B. SSL termination could not be performed if the virtual server's port was not port 443.

C. Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port 443.

D. Virtual servers with a ClientSSL profile are always configured with a destination port of 443.