電子當（PDF）試用
H3C GB0-372-ENU題庫介紹
還在猶豫 NewDumps 的題庫品質嗎？H3CSE-RS-SW（GB0-372-ENU）提供免費範例試題下載，先看再買更安心。滿意之後再入手完整 435 題版本也不遲，備考決策零風險。
H3C GB0-372-ENU 考試概覽:
| 認證廠商: | H3C |
|---|---|
| 考試名稱: | H3CSE-RS-SW 認證考試 (路由與交換) |
| 考試代碼: | GB0-372-ENU |
| 支援語言: | English |
| 考試形式: | 單選題, 多選題 |
| 相關認證: | H3CIE H3CNE H3CSE |
| 範例考題: | H3C GB0-372-ENU 範例考題 |
| 考試方式: | 透過授權測試中心或線上監考平台進行的電腦化考試 |
| 必備條件: | 建議具備相當於 H3CNE 或類似認證的網路基礎知識 |
H3C GB0-372-ENU 考試大綱主題:
| 章節 | 目標 |
|---|---|
| QoS 與流量管理 | - QoS 概念與機制 |
| 乙太網路交換 | - 生成樹協定 (STP/RSTP/MSTP) - VLAN 設定與運作 - MAC 位址學習與轉發 |
| 網路安全基礎 | - 存取控制清單 (ACL) - 基本設備安全設定 |
| IPv4 與 IPv6 | - IPv6 定址與部署 - IPv4 定址與子網路劃分 |
| 網路基礎知識 | - OSI 與 TCP/IP 模型 - 基本網路元件與運作 |
| IP 路由 | - BGP 基礎知識 - OSPF 路由協定 - 靜態路由 |
| 網路服務 | - DHCP - NAT |
GB0-372-ENU 考試必讀：考生最常問的幾個問題
GB0-372-ENU（H3CSE-RS-SW 認證考試 (路由與交換)）是 H3C 舉辦的認證考試，通過後可取得 H3CSE (路由與交換) 認證，認證等級屬於 專業級。本考試與 H3CNE、H3CSE、H3CIE 等認證相關，是規劃 H3C 認證路徑時的重要一環。準備 H3CSE-RS-SW 時，建議搭配 NewDumps 的 435 道練習題，熟悉題型與出題方向。
報考 GB0-372-ENU 的前置條件為：建議具備相當於 H3CNE 或類似認證的網路基礎知識。官方的報考規定可能隨時調整。
以下是官方為 H3CSE-RS-SW 推薦的培訓資源：
完成官方培訓後，再搭配 NewDumps 的 435 道 GB0-372-ENU 練習題反覆演練，能把課程所學轉化為實際的答題能力。
可以。NewDumps 提供 GB0-372-ENU 免費範例試題（Free PDF Demo），下載後即可檢視實際題型與解析品質，滿意再購買完整版。購買後享有 365 天免費更新，期間內題庫內容隨官方考綱同步修訂；更新期滿後若需續更，可享 50% 折扣優惠。
NewDumps 提供「退款保證」：購買後 60 天內參加 GB0-372-ENU 對應考試未通過，可申請全額退款。申請時需於考後 2 天內提交報名證明（准考證）影本與官方成績單（Score Report）PDF，考生姓名須與付款人姓名一致，我們會在 7 天內處理完成；購買後 3 天內應考、未實際參加考試、免費資料與過期訂單不適用。若不想退款，也可選擇免費更換兩個等值考試資料，並保留原購產品的更新服務。交付方面，付款成功後系統會在一分鐘內將產品寄至您的電子郵件信箱，可立即下載使用；若 2 小時內未收到，請聯絡客服協助。產品不限制安裝的電腦數量。
根據官方大綱，GB0-372-ENU 考試共分為 7 個領域，主要包括 IPv4 與 IPv6、網路服務、網路安全基礎 等。各領域的詳細子主題與配分，請參考上方的考試大綱區塊，那裡有最完整的說明。
最新的 H3CSE-Routing & Switching GB0-372-ENU 免費考試真題：
In the switching network shown in the figure, all three switches have only the default VLAN 1. The interconnected ports of the three switches are all Trunks, and all VLANs are allowed to pass. The global and port GVRP functions are enabled on the three switches. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet 1/0/1 port on the switch SWA is set to Fixed. Check the status information of each Trunk port on the three switches.
Which of the following is correct?
- A. [SWB] display interface Ethernet 1/0/2 Ethernet1/0/2 current state: UP ......
PVID: 1
Mdi type: auto
Link delay is 0(sec)Port link-type: trunk
VLAN passing: 1(default vlan),10,20
VLAN permitted: 1(default vlan),2-4094 Trunk port encapsulation: IEEE 802.1q - B. [SWC] display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ......
PVID: 1
Mdi type: auto
Link delay is 0 (sec)Port link-type: trunk
VLAN passing: 1 (default vlan), 10, 20
VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q - C. [SWA] display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ......
PVID: 1
Mdi type: auto
Link delay is 0 (sec)Port link-type: trunk
VLAN passing: 1 (default vlan), 10, 20
VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q - D. [SWB] display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ......
PVID: 1
Mdi type: auto
Link delay is 0(sec)Port link-type: trunk
VLAN passing: 1(default vlan),10,20
VLAN permitted: 1(default vlan),2-4094 Trunk port encapsulation: IEEE 802.1q
Which of the following statements about multicast routing protocols are correct? (Multiple choice)
- A. Intra-domain multicast routing protocols include: MSDP, DVMRP, MOSPF, PIM
- B. Multicast routing protocols have two modes: dense and sparse
- C. In dense mode, multicast data streams are pushed from the multicast source to every corner of the network, and multicast receivers passively receive multicast packets.
- D. In sparse mode, multicast data streams are sent from the multicast source to the multicast receivers in a pull manner, and the multicast receivers actively send reception requests.
The router IGMP protocol version can be configured which of the following in the view?
- A. System global view
- B. Interface view
- C. IGMP view
- D. User view
The router IGMP Snooping function must be enabled in which of the following view?
- A. User View
- B. System global view
- C. IGMP view
- D. VLAN view
The customer's LAN switch SWA has dual uplink connections to switches SWB and SWC.
SmartLink is used to ensure link reliability. The SWA switch has the following configuration:
[SWA-smlk-group1] smart-link flush enable control-vlan 10 The SWB switch has the following configuration?
[SWB-GigabitEthernet1/0/1] smart-link flush enables control-vlan 100 The SWC switch has the following configuration:
[SWC-GigabitEthernet1/0/1] smart-link flush enables control-vlan 100
If the interconnection interfaces of switches SWA, SWB, and SWC allow all VLANs to pass, what can we learn from the above information? (Multiple choice)
- A. If the configuration is not changed, the SmartLink backup function of the SWA switch cannot be realized
- B. No configuration changes are required, the SmartLink backup function of the SWA switch can be realized
- C. Change the receiving control VLAN of SWB and SWC switches to 10, and the SmartLink backup function of SWA switch can be realized normally.
- D. Change the receiving control VLAN of SWB and SWC switches to 10. SWB and SWC switches refresh MAC and ARP through traffic.
919位客戶反饋
65.50.105.* -
如果你不想在GB0-372-ENU考試上浪費太多時間，可以參考NewDumps的考古題，這個對我的幫助很大，并通過了考試。