問題1
Refer to the exhibit.
The HP 3800 switch with member ID 1 shown in the exhibit goes down. What happens?
Refer to the exhibit.
The HP 3800 switch with member ID 1 shown in the exhibit goes down. What happens?
正確答案: B
說明：（僅 NewDumps 成員可見）
問題2
An HP Provision switch port is implementing MAC Authentication (MAC-Auth) to a RADIUS server. A device connects to the port, and the switch submits a RADIUS Access-Request to the server. What correctly describes how the switch determines the username and password for the request?
An HP Provision switch port is implementing MAC Authentication (MAC-Auth) to a RADIUS server. A device connects to the port, and the switch submits a RADIUS Access-Request to the server. What correctly describes how the switch determines the username and password for the request?
正確答案: A
說明：（僅 NewDumps 成員可見）
問題3
The network administrator is configuring Unidirectional Link Detection (UDLD) on trk1 on an HP Provision witch. The trk1 link aggregation group has these settings:
Interfaces = 48 and 49
Untagged VLAN = 1
Tagged VLANs = 2-4
How should the administrator complete the setup?
The network administrator is configuring Unidirectional Link Detection (UDLD) on trk1 on an HP Provision witch. The trk1 link aggregation group has these settings:
Interfaces = 48 and 49
Untagged VLAN = 1
Tagged VLANs = 2-4
How should the administrator complete the setup?
正確答案: D
說明：（僅 NewDumps 成員可見）
問題4
Refer to the exhibit.
Switch 1 and Switch 2 have established and Interswitch Connection (ISC) and two distributed trunks. All of the switches have Multiple Spanning tree Protocol (MSTP) enabled. Where does Switch 1 transmit or process Bridge Protocol Data Units (BPDUs)?
Refer to the exhibit.
Switch 1 and Switch 2 have established and Interswitch Connection (ISC) and two distributed trunks. All of the switches have Multiple Spanning tree Protocol (MSTP) enabled. Where does Switch 1 transmit or process Bridge Protocol Data Units (BPDUs)?
正確答案: C
說明：（僅 NewDumps 成員可見）
問題5
HP Comware Switch 1 connects to switch 2 on GigabitEthernet 1/0/1. Switch 2 implements an inbound rate limit of 600 Mbps. The network administrator wants switch 1 to buffer traffic that exceeds the Switch 2 rate limit of 600 Mbps and send the traffic at 600 Mbps. All traffic has the same 802.1p priority and is forwarded in priority queue 2.
What should the administrator apply to the Switch 1 interface GigabitEthernet 1/0/1?
HP Comware Switch 1 connects to switch 2 on GigabitEthernet 1/0/1. Switch 2 implements an inbound rate limit of 600 Mbps. The network administrator wants switch 1 to buffer traffic that exceeds the Switch 2 rate limit of 600 Mbps and send the traffic at 600 Mbps. All traffic has the same 802.1p priority and is forwarded in priority queue 2.
What should the administrator apply to the Switch 1 interface GigabitEthernet 1/0/1?
正確答案: D
說明：（僅 NewDumps 成員可見）
問題6
A company uses 802.1X authentication to force users to authenticate to connect to the network. The company uses HP IMC User Access manager (UAM) as the RADIUS server. The company wants to assign users to VLANs based on their identity. For example, contractor should be assigned in VLAN 20. Assume that VLANs are extended correctly across the network infrastructure.
Where does a network administrator configure the VLAN policy?
A company uses 802.1X authentication to force users to authenticate to connect to the network. The company uses HP IMC User Access manager (UAM) as the RADIUS server. The company wants to assign users to VLANs based on their identity. For example, contractor should be assigned in VLAN 20. Assume that VLANs are extended correctly across the network infrastructure.
Where does a network administrator configure the VLAN policy?
正確答案: C
說明：（僅 NewDumps 成員可見）