先試後買

A. You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.

B. You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.

C. An automation stitch configured to execute actions sequentially can take parameters from previous actions as input for the current action.

D. You can configure automation stitches on any FortiGate device in a Security Fabric environment.

A. Remote registry is not running on the workstation.

B. DNS resolution is unable to resolve the workstation name.

C. The user's status shows as "not verified" in the collector agent

D. The FortiGate firmware version is not compatible with that of the collector agent

E. A firewall is blocking traffic to port 139 and 445.

A. Enable asymmetric routing under config system settings.

B. Modify the default gateway on thelaptop from 10.1.0.2 to 10.2.0.2

C. Change the configuration from strict RPF check mode to feasible RPF check mode

D. A firewall policy that allows all ICMP traffic from port3 to port1.

A. The BGP neighbor is advertising the 10.20.30.40/24 network to the local router.

B. The BGP state of the two BGP participants is OpenConfirm.

C. The router ID of the neighbor is 100.64.2.254.

D. The local router is adverting the 10.20.30.40/24 network to its BGP neighbor.