電子當（PDF）試用
Fortinet NSE7_SDW-6.4題庫介紹
從 NSE7_SDW-6.4 考試資訊、大綱解析到 82 道練習題，NewDumps 把 Fortinet NSE 7 - SD-WAN 6.4 所需的備考資源一次備齊。選定適合自己的產品形式，接下來只要專心刷題就好。
Fortinet NSE7_SDW-6.4 考試概覽:
| 認證廠商: | Fortinet |
|---|---|
| 考試名稱: | Fortinet NSE 7 - SD-WAN 6.4 |
| 考試代碼: | NSE7_SDW-6.4 |
| 相關認證: | Fortinet Network Security Expert (NSE) Program Fortinet NSE 7 Network Security Architect |
| 支援語言: | English |
| 實際考試題數: | 35 |
| 及格分數: | 通過/未通過 |
| 證照有效期限: | 2年 |
| 考試形式: | 單選題, 多選題 |
| 考試時間: | 60 分鐘 |
| 考試費用: | 400美元 |
| 範例考題: | Fortinet NSE7_SDW-6.4 範例考題 |
| 考試方式: | 可於Pearson VUE考試中心應考，或透過Pearson VUE線上監考模式應考。 |
| 必備條件: | 建議具備FortiGate管理經驗，並完成Fortinet SD-WAN相關訓練課程。應考者通常需先具備NSE 4等級的知識基礎，再報考NSE 7考試。 |
| 官方大綱網址: | https://training.fortinet.com |
Fortinet NSE7_SDW-6.4 考試大綱主題:
| 章節 | 目標 |
|---|---|
| 主題 1: VPN整合與ADVPN | - ADVPN
|
| 主題 2: 部署與設定安全SD-WAN | - SD-WAN架構
|
| 主題 3: 流量導向與應用感知 | - 使用體驗品質
|
| 主題 4: 監控與故障排除 | - 診斷功能
|
| 主題 5: 動態路由與進階網路功能 | - 進階部署情境
|
關於 Fortinet NSE7_SDW-6.4 認證，你可能想問的事
NSE7_SDW-6.4（Fortinet NSE 7 - SD-WAN 6.4）是 Fortinet 舉辦的認證考試，通過後可取得 NSE 7 Network Security Architect 認證，認證等級屬於 專業級。本考試與 Fortinet NSE 7 Network Security Architect、Fortinet Network Security Expert (NSE) Program 等認證相關，是規劃 Fortinet 認證路徑時的重要一環。準備 Fortinet NSE 7 - SD-WAN 6.4 時，建議搭配 NewDumps 的 82 道練習題，熟悉題型與出題方向。
依官方資訊，NSE7_SDW-6.4 考試的題量為 35 題，考試時間為 60 分鐘。以這樣的題量與時間來看，平均每題可分配的作答時間相當有限，遇到沒把握的題目建議先標記、跳過，把時間留給有把握的部分，最後再回頭檢查。平時可用 NewDumps 的測試引擎做限時模考，提前適應時間壓力，正式上場才不會慌。
NSE7_SDW-6.4 的通過分數為 通過/未通過，官方報名費為 400美元。需要特別留意的是，一旦未通過，重考必須再次全額繳交報名費，時間與金錢成本都不低。建議在正式報名前，先用 NewDumps 的 82 道模擬試題自測，成績穩定達標後再預約考試。
報考 NSE7_SDW-6.4 的前置條件為：建議具備FortiGate管理經驗，並完成Fortinet SD-WAN相關訓練課程。應考者通常需先具備NSE 4等級的知識基礎，再報考NSE 7考試。。官方的報考規定可能隨時調整，建議報名前再到官方考試說明頁面確認最新資訊。
可以。NewDumps 提供 NSE7_SDW-6.4 免費範例試題（Free PDF Demo），下載後即可檢視實際題型與解析品質，滿意再購買完整版。購買後享有 365 天免費更新，期間內題庫內容隨官方考綱同步修訂；更新期滿後若需續更，可享 50% 折扣優惠。
NewDumps 提供「退款保證」：購買後 60 天內參加 NSE7_SDW-6.4 對應考試未通過，可申請全額退款。申請時需於考後 2 天內提交報名證明（准考證）影本與官方成績單（Score Report）PDF，考生姓名須與付款人姓名一致，我們會在 7 天內處理完成；購買後 3 天內應考、未實際參加考試、免費資料與過期訂單不適用。若不想退款，也可選擇免費更換兩個等值考試資料，並保留原購產品的更新服務。交付方面，付款成功後系統會在一分鐘內將產品寄至您的電子郵件信箱，可立即下載使用；若 2 小時內未收到，請聯絡客服協助。產品不限制安裝的電腦數量。
根據官方大綱，NSE7_SDW-6.4 考試共分為 5 個領域，主要包括 流量導向與應用感知、監控與故障排除、VPN整合與ADVPN 等。各領域的詳細子主題與配分，請參考上方的考試大綱區塊，那裡有最完整的說明。
最新的 NSE 7 Network Security Architect NSE7_SDW-6.4 免費考試真題：
問題 #1
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
A. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
B. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
D. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
問題 #2
Which action FortiGate performs on traffic that is subject to a per-IP traffic shaper of 10 Mbps?
A. FortiGate shares 10 Mbps of bandwidth equally among all source IP addresses.
B. FortiGate applies traffic shaping to the original traffic direction only.
C. FortiGate guarantees a minimum of 10 Mbps of bandwidth to each source IP address.
D. FortiGate limits each source IP address to a maximum bandwidth of 10 Mbps.
問題 #3
Refer to exhibits.
Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate.
Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)
A. All the existing sessions will be blocked from using port1 and port2.
B. All the existing sessions using SNAT will be flushed and routed through port1.
C. All the existing sessions that do not use SNAT will be flushed and routed through port1.
D. All the existing sessions will continue to use port2, and new sessions will use port1.
問題 #4
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
A. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
B. Both SD-WAN member interfaces have used separate SLA targets.
C. SD-WAN member interfaces are affected by the SLA state of the inactive interface
D. Port1 became dead 1ecause no traffic was offload through the egress of port1.
問題 #5
Which two statements about SLA targets and SD-WAN rules are true? (Choose two.)
A. SLA targets are used only by SD-WAN rules that are configured with Lowest Cost (SLA) or Maximize Bandwidth (SLA) as strategy.
B. SD-WAN rules use SLA targets to check if the preferred members meet the SLA requirements.
C. Member metrics are measured only if an SLA target is configured.
D. When configuring an SD-WAN rule, you can select multiple SLA targets of the same performance SLA.
問題與答案：
| 問題 #1 答案： B,D | 問題 #2 答案： D | 問題 #3 答案： B,C | 問題 #4 答案： A | 問題 #5 答案： A,B |
917位客戶反饋
1.169.213.* -
本周，我通過了我的NSE7_SDW-6.4考試，我第一次嘗試用你們網站的學習資料，沒有讓我失望，它是真的對我有幫助的練習資料。