ISQI TMMi-P_Syll2020題庫介紹
TMMi-P_Syll2020 考試一旦落榜,報名費就得重新繳一次,與其冒險應考,不如一次準備到位。NewDumps 的 ISQI TMMi - Test Maturity Model Integration Professional 題庫共收錄 113 題,2026 年持續更新中,讓每一分準備都算數。
ISQI TMMi-P_Syll2020 考試概覽:
| 認證廠商: | ISQI |
|---|---|
| 考試名稱: | TMMi 專業級-測試成熟度模型整合 |
| 考試代碼: | TMMi-P_Syll2020 |
| 實際考試題數: | 50 |
| 考試費用: | 歐元 450-550 |
| 支援語言: | 英文, 德文 |
| 考試時間: | 180 分鐘 |
| 相關認證: | TMMi 基礎級 |
| 考試形式: | 個案情境題, 是非題, 選擇題 |
| 及格分數: | 65% |
| 證照有效期限: | 3 年 |
| 範例考題: | ISQI TMMi-P_Syll2020 範例考題 |
| 考試方式: | 筆試 / 電腦化測驗,於授權考場舉行 |
| 必備條件: | 建議具備:TMMi 基礎級認證或於測試流程改善領域有同等相關工作經驗 |
| 官方大綱網址: | https://www.tmmi.org/certifications |
ISQI TMMi-P_Syll2020 考試大綱主題:
| 章節 | 權重 | 目標 |
|---|---|---|
| 主題 1: 測試流程改善(TPI) | 15% | - 執行策略 - 擬定改善藍圖 - 評估現有測試成熟度 |
| 主題 2: 執行指引 | 20% | - 依組織需求調整 TMMi - 測試改善的變革管理 - 利害關係人參與策略 |
| 主題 3: TMMi 模型概覽 | 10% | - TMMi 架構與成熟度等級(1至5級) - TMMi 的發展歷程與宗旨 - 與 TMMi 參考模型的關聯性 |
| 主題 4: TMMi 認證流程 | 15% | - 評量方法 - TMMi 認證標準 - 文件提交要求 |
| 主題 5: 測試流程成熟度(TPM) | 15% | - 流程能力衡量方式 - 差距分析方法 - 成熟度模型原則 |
| 主題 6: 實務應用 | 25% | - 個案研究分析 - 最佳實務與經驗分享 - 實務情境演練 |
關於 ISQI TMMi-P_Syll2020 認證,你可能想問的事
TMMi-P_Syll2020(TMMi 專業級-測試成熟度模型整合)是 ISQI 舉辦的認證考試,通過後可取得 iSQI TMMi 認證,認證等級屬於 專業級。本考試與 TMMi 基礎級 等認證相關,是規劃 ISQI 認證路徑時的重要一環。準備 ISQI TMMi - Test Maturity Model Integration Professional 時,建議搭配 NewDumps 的 113 道練習題,熟悉題型與出題方向。
依官方資訊,TMMi-P_Syll2020 考試的題量為 50 題,考試時間為 180 分鐘。以這樣的題量與時間來看,平均每題可分配的作答時間相當有限,遇到沒把握的題目建議先標記、跳過,把時間留給有把握的部分,最後再回頭檢查。平時可用 NewDumps 的測試引擎做限時模考,提前適應時間壓力,正式上場才不會慌。
TMMi-P_Syll2020 的通過分數為 65%,官方報名費為 歐元 450-550。需要特別留意的是,一旦未通過,重考必須再次全額繳交報名費,時間與金錢成本都不低。建議在正式報名前,先用 NewDumps 的 113 道模擬試題自測,成績穩定達標後再預約考試。
報考 TMMi-P_Syll2020 的前置條件為:建議具備:TMMi 基礎級認證或於測試流程改善領域有同等相關工作經驗。官方的報考規定可能隨時調整,建議報名前再到官方考試說明頁面確認最新資訊。
可以。NewDumps 提供 TMMi-P_Syll2020 免費範例試題(Free PDF Demo),下載後即可檢視實際題型與解析品質,滿意再購買完整版。購買後享有 365 天免費更新,期間內題庫內容隨官方考綱同步修訂;更新期滿後若需續更,可享 50% 折扣優惠。
NewDumps 提供「退款保證」:購買後 60 天內參加 TMMi-P_Syll2020 對應考試未通過,可申請全額退款。申請時需於考後 2 天內提交報名證明(准考證)影本與官方成績單(Score Report)PDF,考生姓名須與付款人姓名一致,我們會在 7 天內處理完成;購買後 3 天內應考、未實際參加考試、免費資料與過期訂單不適用。若不想退款,也可選擇免費更換兩個等值考試資料,並保留原購產品的更新服務。交付方面,付款成功後系統會在一分鐘內將產品寄至您的電子郵件信箱,可立即下載使用;若 2 小時內未收到,請聯絡客服協助。產品不限制安裝的電腦數量。
根據官方大綱,TMMi-P_Syll2020 考試共分為 6 個領域,主要包括 測試流程改善(TPI)(15%)、TMMi 認證流程(15%)、TMMi 模型概覽(10%) 等。各領域的詳細子主題與配分,請參考上方的考試大綱區塊,那裡有最完整的說明。
最新的 iSQI TMMi TMMi-P_Syll2020 免費考試真題:
問題 #1
Advanced Reviews is a TMMi level 4 process area.
To which specific goal of the Advanced Reviews process area does the specific practice "Revise the product risks as appropriate" belong?
A. SG 2 Measure Product Quality Early in the Lifecycle by Means of Peer Reviews
B. SG 3 Adjust the Test Approach Based on Review Results Early in the Lifecycle
C. The specific practice "Revise the product risks as appropriate" is not related to a specific goal of the Advanced Reviews process area
D. SG 1 Coordinate the Peer Review Approach with the Dynamic Test Approach
問題 #2
The three TMMi level 5 process areas. Defect Prevention, Quality Control and Test Process Optimization, all provide support for continuous process improvement.
Which of the following statements on the relationship between these process areas is correct?
A. Test Process Optimization supports Quality Control by analysing outliers to process performance and by implementing practices to prevent defect re-occurrence.
B. Quality Control supports Defect Prevention by evaluating new testing technologies and determining their impact on the testing process.
C. Quality Control supports Defect Prevention by implementing test improvement proposals
D. Defect Prevention supports Test Process Optimization by submitting test improvement proposals
問題 #3
Consider the following specific goal "Project Goals for Product Quality and their Priorities are Established".
To which of the following process areas does this specific goal belong?
A. Product Quality Evaluation
B. Test Policy and Strategy
C. Test Measurement
D. Advanced Reviews.
問題 #4
Which of the following is a TMMi level 5 process area?
A. Organizational Innovation and Deployment
B. Advanced Reviews
C. Defect Prevention
D. Test Measurement
問題 #5
Which of the following activities are part of the Acting phase of a test improvement cycle?
1)Set Priorities
2)Create Solutions
3)Plan Actions
4)Pilot Solutions
A. 1 and 2
B. 2 and 4
C. 1 and 3
D. 2, 3 and 4
問題與答案:
| 問題 #1 答案: C | 問題 #2 答案: D | 問題 #3 答案: A | 問題 #4 答案: C | 問題 #5 答案: D |
電子當(PDF)試用





524位客戶反饋


113.206.164.* -
你們的考試題庫非常實,讓我輕松的通過了TMMi-P_Syll2020考試。